Ya kamata a yi nazarin ka'idar aiki na tashin bollard bisa ga nau'i daban-daban.
Za a iya raba ginshiƙin ɗagawa ta atomatik zuwa nau'i biyu: ginshiƙin ɗaga wutar lantarki da ginshiƙin ɗaga na'ura mai aiki da karfin ruwa.
Rukunin ɗaga bakin ƙarfe galibi ana tafiyar da shi ne ta hanyar iska da wutar lantarki a cikin ginshiƙi.
Babban na'urorin haɗi sune tashar wutar lantarki da injin wutar lantarki, ana haɗa wutar lantarki ta iska tare da injin wutar lantarki, lokacin da aka kunna wuta, ana iya sarrafa sanda don fitar da silinda.
Amfanin wannan zane shine cewa za'a iya gane ɗagawa ta hanyar sarrafawa mai sauƙi.
Lokacin shigar da sassan da aka saka na ginshiƙan ɗagawa, hanyar ita ce yin ƙulli na faɗaɗa da farantin karfe sannan a haɗa su.Da farko, an ƙayyade matsayi na ƙayyadadden batu na ginshiƙan ɗaga bakin karfe, sa'an nan kuma ana amfani da rawar tasiri don yin rawar jiki a ƙasa, sa'an nan kuma an shigar da kullin fadadawa, ana kiyaye kusoshi har tsawon lokacin da za a welded tsakanin matsayi. nut ɗin da aka danne goro kuma goro ya mutu don hana kwancen farantin.Hannun bangon bango an haɗa su da kyau ta hanyar da aka bayyana a sama.
Saboda gina sassan da aka haɗa, za'a iya samun kurakurai, sabili da haka, ya kamata a sake sanya ginshiƙin ɗagawa kafin shigarwa don sanin wurin da aka saka farantin da kuma daidaiton sandar walda a tsaye.Idan akwai wata karkatacciyar hanya, sai a gyara shi cikin lokaci.All bakin karfe dagawa ginshikan za a located a kusa da karfe farantin welds.
Kafin shigar da ginshiƙin ɗaga bakin karfe, ana sarrafa tsagi a saman saman ƙarshen ginshiƙin ɗaga bakin karfe ta hanyar zana layin kuma bisa ga kusurwar wurin da aka karkata da kuma zagaye na hannun hannu.Sannan layin hannu kai tsaye zuwa cikin tsagi na ɗagawa, daga wannan ƙarshen zuwa wancan ƙarshen shigarwar tabo na walda, madaidaicin shigarwa na hannun docking daidai, matsatstsun haɗin gwiwa.
Lokacin da duk abubuwan walda suka cika, za a goge waldawan zuwa ga sumul ba tare da haɗin gwiwar saida ba.Tare da flannelette polishing, nika dabaran ko jin polishing, a lokaci guda ta yin amfani da daidai polishing manna, har sai da m tushe ne m guda, babu weld.
Abubuwan da ke sama wasu nasihu ne don shigar da ginshiƙin ɗagawa.Ko dai lokacin da aka binne ginshiƙi na ɗagawa ko kuma bayan an gama waldawar, ƙananan bayanai a cikin duka aikin dole ne a fahimci su da kyau, don guje wa wasu matsaloli a cikin amfani na gaba., Shafi
Barka da zuwa tuntube mu ~
Lokacin aikawa: Fabrairu-17-2022
